Camillus Glide Sharpener
$19.99
In stock
Item No.
19224
Camillus Glide Sharpener is rated
out of
5 by
11.
- Ideal for Knives, Axes, Shears, and Hooks
- T6, T8, T9 and T10 Drivers
- Carbide Multi Angle Sharpener
- V-Notch Ceramic and Carbide Sharpener
- 20, 30 and 45 Degree Shear Sharpener
- Hook Sharpener
- Flat Head Screwdriver
- Handle Material: Glass Filled Nylon
- Rockwell Hardness: HRC50-60
- Lifetime Warranty
WATCH IT IN ACTION
The Camillus GLIDE Sharpener is a paragon of versatility. Knives, shears, and hooks can all be sharpened with its myriad of notches and channels, providing exceptional edges for countless blade designs and materials. Boasting a multi-angle Carbide Sharpener, a V-Notch Ceramic Sharpener, V-Notch Carbide Sharpener, 20, 30, and 45 Degree Shear Sharpeners, as well as a fish hook sharpening groove, you can have nearly all your gear operating at peak performance with a single tool. The unparalleled versatility afforded by the GLIDE Sharpener goes beyond just sharpening as well, equipped with T6, T8, T9, and T10 Drivers, and a Flat Head Screwdriver. Backed by a Lifetime Warranty, the GLIDE Sharpener is a must have for outdoorsmen, craftsmen, and survivalists alike. Never worry about separate sharpening solutions again.
We found other products you might like!
We found other products you might like!
Reviews
Rated 4 out of
5
by
rockysan from
Nice sharpener with additional features
I received this sharpener for trial and review. The V-grooves are really nice and work well to give a good edge to the knife, but the edge will still need some work to get really sharp. I am neutral with the scissor sharpening slots, I just couldn't get a feel for using them. Having said all that, I did really like the Torx bits on the tool. These were really helpful in tightening down the screws that held down the scales on some of my knives. This sharpener would be a great addition to any small kit you take out in the field. I would recommend this sharpener.
Date published: 2017-02-16
Rated 5 out of
5
by
Kootenayboy from
Simple effective and economical
I picked this up from Wal-Mart as an impulse purchase took it home as tried it out I was impressed after sharpening the first knife and snugging up all it's screws I went on to do all my Bush and survival knives then my kitchen knives and onto my scissors. I was actually bummed I ran out of things to sharpen.
It's so fast and easy I cannot go back to old methods , the knives etc are surgical sharp I'd recommend it to anyone.
Date published: 2018-10-22
Rated 4 out of
5
by
WenatcheeMike from
Great features!
The V notch carbide and ceramic sharpener are typical, but the different slots for varied angles is nice, and the star bits are great, as many knives now are assembled with these.
Date published: 2016-12-22
Rated 5 out of
5
by
Shopdog 88 from
Works good
I just try it out.The Camillus Glide Sharpener works good. I had a small knife the Keep with me.its hard to sharpen it.I try it with the small knife and found out how great it works on it and how easy it is to use it. I try with other knives I have.how nice they sharpen they are.
Date published: 2016-12-22
Rated 4 out of
5
by
Bigb13 from
Palm-size, Multi-blade Sharpening Tool
This Camillus sharpener is convenient and provides a nice edge on my knives. I keep it in my tackle box, but pull it out for our carving set and tools as needed.
Date published: 2017-01-18
Rated 4 out of
5
by
Thunder81 from
A lot packed into a little package.
If you are looking for a great pocket sharpener, this is it. It's great for general maintenance tasks and is well suited for putting an edge on most any blade you've got.
Date published: 2017-03-22
Rated 5 out of
5
by
Badams from
Great product
Gets knives razor sharp and hooks also. Knives keep a edge too. Takes bout 30 sec to sharpen a dull knife
Date published: 2017-02-11
Rated 4 out of
5
by
walt from
Good Features
I got this a few weeks ago it comes in handy for sharpining
Date published: 2017-02-13
Questions
On my sharpener on the opposite end from the flat blade screwdriver there is a hollowed out spot with a bar in the middle that is like and upside down backwards L. What is it used for if anything. Sparked my imagination
It's an attachment point for a lanyard or clip, but isn't provided.
Date published: 2020-05-19
What is the purpose of the tool marked " CARBIDE " on this product
The tools marked "CARBIDE" on this product are a Carbide Multi Angle Sharpener and Carbide Sharpener.
This overall product is ideal for sharpening knives, axes, shears, and hooks.
Date published: 2022-08-28
What is the proper technique to sharpen scissors or shears on the family's knife sharpener
You will need to identify the current angle of your shears, then simply insert one side of the shear into the slot and draw it across the lower portion.
https://www.youtube.com/watch?time_continue=2&v=eCKXGitLsQk
Date published: 2022-01-11
At what angles are the carbide stones set?
The angle for carbide and ceramic stones is set at 40 degrees.
Date published: 2019-02-13
How do you sharpen hooks
To sharpen hooks, please find the full length white sharpener on the bottom. There is a notch in the middle where hooks can slide in and sharpen that way.
Date published: 2019-06-26
Does the SHARPENER sharpen sewing scissors? If so, what is the correct way?
The sharpener would work on sewing scissors.
Correct usage of the Glide is by identifying the current angle of your shears, and then simply inserting one side of the shear into the slot and draw across the lower portion.
Date published: 2019-01-10